#### reserved to condition for example yes, no, quit     ####
0.0:Y
0.1:N
#### Space reserved to file diskcopy.c                   ####
1.0:Invalid drive specification or non removable media.
1.1:Error reading configuration file.
1.2:Invalid switch:
1.3:Too many parameters:
1.4:File is write protected! 
1.5:copied to
1.6:File not found:
1.7:File already exists!
1.8:Insert SOURCE diskette into drive
1.9:Press any key to continue . . .
1.10:Disk not ready!
1.11:Unable to open image file.
1.12:Not enough disk space on target drive!
1.13:Error accessing image file:
1.14:Insufficient memory for disk copy.
1.15:Using
1.16:temporary file.
1.17:Reading SOURCE diskette . . .
1.18:Media error reading from sector
1.19:Writing to image file.
1.20:Unsuspected memory error.
1.21:Insert TARGET diskette into drive
1.22:Diskette does not have the same capacity as the original.
1.23:Put a diskette with the right capacity in drive
1.24:or press CTRL-C to cancel.
1.25:Writing to TARGET diskette in drive . . .
1.26:Reading from image file.
1.27:Media error writing to sector
1.28:Do you want another copy of this
1.29:image file (Y/N)?
1.30:disk (Y/N)?
1.31:Copy another disk (Y/N)?
1.32:Can not copy image file.
1.33:Problem reading image file.
1.34:Creating image file . . .
1.35:Writing image file . . .
1.36:Problem writing image file.
1.37:Compare error on sector
1.38:Verifying . . .
1.39:Using verification
1.40:Volume serial number is
#### text is "Warning: options % doesn't do anything!"   ####
2.0:Warning: option
2.1:doesn't do anything!
#### text is "Problem copying % to %"                    ####
3.0:Problem copying
3.1:to
#### text is "Copying % clusters, % sectors per cluster, ####
#### % bytes per sector.\n Drive size is % bytes"        ####
4.0:Copying
4.1:clusters
4.2:sectors per cluster
4.3:bytes per sector.
4.4:Relevant drive size is
4.5:bytes.
5.0:buffer of
5.1:bytes.
#### Space reserved to file parser.c                     ####
#### Text is "Syntax error on line % in                  ####
#### configuration file"                                 ####
6.0:Syntax error on line
6.1:in configuration file
6.2:Semantic error in configuration file
6.3:do not enter more than one '='
#### Don't translate the following uppercase words!      ####
6.4:Please enter YES or NO
6.5:Please enter NEVER or ALWAYS
6.6:please enter RECOVERY or NORMAL
6.7:please enter FAST or FULL
6.8:please enter UPDATE or LEAVE
#### Space reserver to file recovery.c                   ####
6.10:Media error reading from disk, rescanning...
6.11:Unreadable sector at position
#### Space reserved to file tdrvcpy.c                    ####
7.0:Put source diskette in drive
7.1:Put destination diskette in drive
7.2:Press any key to continue...
7.3:Invalid src drive specification or non removable media.
7.4:Invalid dst drive specification or non removable media.
7.5:Diskette does not have the same capacity as the original.
7.6:Insuficient memory error.
7.7:Media error reading from sector
7.8:Media error writing to sector
7.9:Do you want to copy two other diskettes (y/n)?
8.0:Put a diskette with the right capacity in drive
8.1:or
8.2:or press CTRL-C to cancel.
9.0:Copying
9.1:clusters
9.2:sectors per cluster
9.3:bytes per sector.
9.4:Relevant drive size is
9.5:bytes.
9.6:Copying . . .
9.7:Verifying . . .
### Place reserved for the strings in the help screen ###
9.50:Copy one diskette or image file to another diskette or image file.
9.51:by
9.52:source
9.53:destination
9.54:source:      drive or image file to copy from.
9.55:destination: drive or image file to copy to.
9.56:give an audible warning for user action.
9.57:verify reads and writes.
9.58:only use memory for disk copy.
9.59:show memory usage (informative).
9.60:overwrite destination, if it already exists (in case of an image file).
9.61:always automaticaly exit.
9.62:assume disk already in drive.
9.63:go into disk error recovery mode.
9.64:perform fast diskcopy (only copy filled sectors).
9.65:Remarks: a minus sign after an option disables the option.
9.66:         You may specify the same drive for source and destination.
9.67:no-op included for MS-DOS compatibility.
9.68:don't ask target disk if copying image file to same disk.