From: Tom Rini The following patch moves zlib_inflateSync and friends, which are used by PPP and not a 'normal' gzip, into inflate_sync.c. Signed-off-by: Tom Rini Signed-off-by: Andrew Morton --- 25-akpm/lib/zlib_inflate/Makefile | 2 25-akpm/lib/zlib_inflate/inflate.c | 141 ------------------------------ 25-akpm/lib/zlib_inflate/inflate_sync.c | 148 ++++++++++++++++++++++++++++++++ 3 files changed, 149 insertions(+), 142 deletions(-) diff -puN lib/zlib_inflate/inflate.c~zlib_inflate-move-zlib_inflatesync-friends lib/zlib_inflate/inflate.c --- 25/lib/zlib_inflate/inflate.c~zlib_inflate-move-zlib_inflatesync-friends 2004-09-03 22:53:53.973089536 -0700 +++ 25-akpm/lib/zlib_inflate/inflate.c 2004-09-03 22:53:53.979088624 -0700 @@ -246,144 +246,3 @@ int zlib_inflate( z->state->sub.marker = 0; /* can try inflateSync */ return Z_DATA_ERROR; } - - -int zlib_inflateSync( - z_streamp z -) -{ - uInt n; /* number of bytes to look at */ - Byte *p; /* pointer to bytes */ - uInt m; /* number of marker bytes found in a row */ - uLong r, w; /* temporaries to save total_in and total_out */ - - /* set up */ - if (z == NULL || z->state == NULL) - return Z_STREAM_ERROR; - if (z->state->mode != I_BAD) - { - z->state->mode = I_BAD; - z->state->sub.marker = 0; - } - if ((n = z->avail_in) == 0) - return Z_BUF_ERROR; - p = z->next_in; - m = z->state->sub.marker; - - /* search */ - while (n && m < 4) - { - static const Byte mark[4] = {0, 0, 0xff, 0xff}; - if (*p == mark[m]) - m++; - else if (*p) - m = 0; - else - m = 4 - m; - p++, n--; - } - - /* restore */ - z->total_in += p - z->next_in; - z->next_in = p; - z->avail_in = n; - z->state->sub.marker = m; - - /* return no joy or set up to restart on a new block */ - if (m != 4) - return Z_DATA_ERROR; - r = z->total_in; w = z->total_out; - zlib_inflateReset(z); - z->total_in = r; z->total_out = w; - z->state->mode = BLOCKS; - return Z_OK; -} - - -/* Returns true if inflate is currently at the end of a block generated - * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP - * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH - * but removes the length bytes of the resulting empty stored block. When - * decompressing, PPP checks that at the end of input packet, inflate is - * waiting for these length bytes. - */ -int zlib_inflateSyncPoint( - z_streamp z -) -{ - if (z == NULL || z->state == NULL || z->state->blocks == NULL) - return Z_STREAM_ERROR; - return zlib_inflate_blocks_sync_point(z->state->blocks); -} - -/* - * This subroutine adds the data at next_in/avail_in to the output history - * without performing any output. The output buffer must be "caught up"; - * i.e. no pending output (hence s->read equals s->write), and the state must - * be BLOCKS (i.e. we should be willing to see the start of a series of - * BLOCKS). On exit, the output will also be caught up, and the checksum - * will have been updated if need be. - */ -static int zlib_inflate_addhistory(inflate_blocks_statef *s, - z_stream *z) -{ - uLong b; /* bit buffer */ /* NOT USED HERE */ - uInt k; /* bits in bit buffer */ /* NOT USED HERE */ - uInt t; /* temporary storage */ - Byte *p; /* input data pointer */ - uInt n; /* bytes available there */ - Byte *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - if (s->read != s->write) - return Z_STREAM_ERROR; - if (s->mode != TYPE) - return Z_DATA_ERROR; - - /* we're ready to rock */ - LOAD - /* while there is input ready, copy to output buffer, moving - * pointers as needed. - */ - while (n) { - t = n; /* how many to do */ - /* is there room until end of buffer? */ - if (t > m) t = m; - /* update check information */ - if (s->checkfn != NULL) - s->check = (*s->checkfn)(s->check, q, t); - memcpy(q, p, t); - q += t; - p += t; - n -= t; - z->total_out += t; - s->read = q; /* drag read pointer forward */ -/* WWRAP */ /* expand WWRAP macro by hand to handle s->read */ - if (q == s->end) { - s->read = q = s->window; - m = WAVAIL; - } - } - UPDATE - return Z_OK; -} - - -/* - * This subroutine adds the data at next_in/avail_in to the output history - * without performing any output. The output buffer must be "caught up"; - * i.e. no pending output (hence s->read equals s->write), and the state must - * be BLOCKS (i.e. we should be willing to see the start of a series of - * BLOCKS). On exit, the output will also be caught up, and the checksum - * will have been updated if need be. - */ - -int zlib_inflateIncomp( - z_stream *z - -) -{ - if (z->state->mode != BLOCKS) - return Z_DATA_ERROR; - return zlib_inflate_addhistory(z->state->blocks, z); -} diff -puN /dev/null lib/zlib_inflate/inflate_sync.c --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/lib/zlib_inflate/inflate_sync.c 2004-09-03 22:53:53.978088776 -0700 @@ -0,0 +1,148 @@ +/* inflate.c -- zlib interface to inflate modules + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include +#include "infblock.h" +#include "infutil.h" + +int zlib_inflateSync( + z_streamp z +) +{ + uInt n; /* number of bytes to look at */ + Byte *p; /* pointer to bytes */ + uInt m; /* number of marker bytes found in a row */ + uLong r, w; /* temporaries to save total_in and total_out */ + + /* set up */ + if (z == NULL || z->state == NULL) + return Z_STREAM_ERROR; + if (z->state->mode != I_BAD) + { + z->state->mode = I_BAD; + z->state->sub.marker = 0; + } + if ((n = z->avail_in) == 0) + return Z_BUF_ERROR; + p = z->next_in; + m = z->state->sub.marker; + + /* search */ + while (n && m < 4) + { + static const Byte mark[4] = {0, 0, 0xff, 0xff}; + if (*p == mark[m]) + m++; + else if (*p) + m = 0; + else + m = 4 - m; + p++, n--; + } + + /* restore */ + z->total_in += p - z->next_in; + z->next_in = p; + z->avail_in = n; + z->state->sub.marker = m; + + /* return no joy or set up to restart on a new block */ + if (m != 4) + return Z_DATA_ERROR; + r = z->total_in; w = z->total_out; + zlib_inflateReset(z); + z->total_in = r; z->total_out = w; + z->state->mode = BLOCKS; + return Z_OK; +} + + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH + * but removes the length bytes of the resulting empty stored block. When + * decompressing, PPP checks that at the end of input packet, inflate is + * waiting for these length bytes. + */ +int zlib_inflateSyncPoint( + z_streamp z +) +{ + if (z == NULL || z->state == NULL || z->state->blocks == NULL) + return Z_STREAM_ERROR; + return zlib_inflate_blocks_sync_point(z->state->blocks); +} + +/* + * This subroutine adds the data at next_in/avail_in to the output history + * without performing any output. The output buffer must be "caught up"; + * i.e. no pending output (hence s->read equals s->write), and the state must + * be BLOCKS (i.e. we should be willing to see the start of a series of + * BLOCKS). On exit, the output will also be caught up, and the checksum + * will have been updated if need be. + */ +static int zlib_inflate_addhistory(inflate_blocks_statef *s, + z_stream *z) +{ + uLong b; /* bit buffer */ /* NOT USED HERE */ + uInt k; /* bits in bit buffer */ /* NOT USED HERE */ + uInt t; /* temporary storage */ + Byte *p; /* input data pointer */ + uInt n; /* bytes available there */ + Byte *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + if (s->read != s->write) + return Z_STREAM_ERROR; + if (s->mode != TYPE) + return Z_DATA_ERROR; + + /* we're ready to rock */ + LOAD + /* while there is input ready, copy to output buffer, moving + * pointers as needed. + */ + while (n) { + t = n; /* how many to do */ + /* is there room until end of buffer? */ + if (t > m) t = m; + /* update check information */ + if (s->checkfn != NULL) + s->check = (*s->checkfn)(s->check, q, t); + memcpy(q, p, t); + q += t; + p += t; + n -= t; + z->total_out += t; + s->read = q; /* drag read pointer forward */ +/* WWRAP */ /* expand WWRAP macro by hand to handle s->read */ + if (q == s->end) { + s->read = q = s->window; + m = WAVAIL; + } + } + UPDATE + return Z_OK; +} + + +/* + * This subroutine adds the data at next_in/avail_in to the output history + * without performing any output. The output buffer must be "caught up"; + * i.e. no pending output (hence s->read equals s->write), and the state must + * be BLOCKS (i.e. we should be willing to see the start of a series of + * BLOCKS). On exit, the output will also be caught up, and the checksum + * will have been updated if need be. + */ + +int zlib_inflateIncomp( + z_stream *z + +) +{ + if (z->state->mode != BLOCKS) + return Z_DATA_ERROR; + return zlib_inflate_addhistory(z->state->blocks, z); +} diff -puN lib/zlib_inflate/Makefile~zlib_inflate-move-zlib_inflatesync-friends lib/zlib_inflate/Makefile --- 25/lib/zlib_inflate/Makefile~zlib_inflate-move-zlib_inflatesync-friends 2004-09-03 22:53:53.974089384 -0700 +++ 25-akpm/lib/zlib_inflate/Makefile 2004-09-03 22:53:53.978088776 -0700 @@ -16,4 +16,4 @@ obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate.o zlib_inflate-objs := infblock.o infcodes.o inffast.o inflate.o \ - inftrees.o infutil.o inflate_syms.o + inflate_sync.o inftrees.o infutil.o inflate_syms.o _