From: Kumar Gala Refefactor common Book-E exception handling macros into a single file to reduce code duplication. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton --- 25-akpm/arch/ppc/kernel/head_44x.S | 239 ---------------------------------- 25-akpm/arch/ppc/kernel/head_booke.h | 240 +++++++++++++++++++++++++++++++++++ 25-akpm/arch/ppc/kernel/head_e500.S | 236 ---------------------------------- 3 files changed, 243 insertions(+), 472 deletions(-) diff -puN arch/ppc/kernel/head_44x.S~ppc32-refactor-common-book-e-exception-handling-macros arch/ppc/kernel/head_44x.S --- 25/arch/ppc/kernel/head_44x.S~ppc32-refactor-common-book-e-exception-handling-macros 2004-08-25 19:24:19.515555528 -0700 +++ 25-akpm/arch/ppc/kernel/head_44x.S 2004-08-25 19:24:19.523554312 -0700 @@ -41,16 +41,9 @@ #include #include #include +#include "head_booke.h" -/* - * Macros - */ - -#define SET_IVOR(vector_number, vector_label) \ - li r26,vector_label@l; \ - mtspr SPRN_IVOR##vector_number,r26; \ - sync - + /* As with the other PowerPC ports, it is expected that when code * execution begins here, the following registers contain valid, yet * optional, information: @@ -302,234 +295,6 @@ skpinv: addi r4,r4,1 /* Increment */ * We align on a 32 byte cache line boundary for good measure. */ -#define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG4W,r1; \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - beq 1f; \ - mfspr r1,SPRG3; /* if from user, start at top of */\ - lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ - addi r1,r1,THREAD_SIZE; \ -1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ - tophys(r11,r1); \ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mfspr r10,SPRG0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRG1; \ - stw r12,GPR11(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r10,SPRG4R; \ - mfspr r12,SRR0; \ - stw r10,GPR1(r11); \ - mfspr r9,SRR1; \ - stw r10,0(r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a couple of words of memory at low physical addresses. - * This is OK since we don't support SMP on these processors. For Book E - * processors, we also have a reserved register (SPRG2) that is only used - * in critical exceptions so we can free up a GPR to use as the base for - * indirect access to the critical exception save area. This is necessary - * since the MMU is always on and the save area is offset from KERNELBASE. - */ -#define CRITICAL_EXCEPTION_PROLOG \ - mtspr SPRG2,r8; /* SPRG2 only used in criticals */ \ - lis r8,crit_save@ha; \ - stw r10,crit_r10@l(r8); \ - stw r11,crit_r11@l(r8); \ - mfspr r10,SPRG0; \ - stw r10,crit_sprg0@l(r8); \ - mfspr r10,SPRG1; \ - stw r10,crit_sprg1@l(r8); \ - mfspr r10,SPRG4R; \ - stw r10,crit_sprg4@l(r8); \ - mfspr r10,SPRG5R; \ - stw r10,crit_sprg5@l(r8); \ - mfspr r10,SPRG7R; \ - stw r10,crit_sprg7@l(r8); \ - mfspr r10,SPRN_PID; \ - stw r10,crit_pid@l(r8); \ - mfspr r10,SRR0; \ - stw r10,crit_srr0@l(r8); \ - mfspr r10,SRR1; \ - stw r10,crit_srr1@l(r8); \ - mfspr r8,SPRG2; /* SPRG2 only used in criticals */ \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - lis r11,critical_stack_top@h; \ - ori r11,r11,critical_stack_top@l; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,CSRR0; \ - stw r1,GPR1(r11); \ - mfspr r9,CSRR1; \ - stw r1,0(r11); \ - tovirt(r1,r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Exception prolog for machine check exceptions. This is similar to - * the critical exception prolog, except that machine check exceptions - * have their own save area. For Book E processors, we also have a - * reserved register (SPRG6) that is only used in machine check exceptions - * so we can free up a GPR to use as the base for indirect access to the - * machine check exception save area. This is necessary since the MMU - * is always on and the save area is offset from KERNELBASE. - */ -#define MCHECK_EXCEPTION_PROLOG \ - mtspr SPRG6W,r8; /* SPRG6 used in machine checks */ \ - lis r8,mcheck_save@ha; \ - stw r10,mcheck_r10@l(r8); \ - stw r11,mcheck_r11@l(r8); \ - mfspr r10,SPRG0; \ - stw r10,mcheck_sprg0@l(r8); \ - mfspr r10,SPRG1; \ - stw r10,mcheck_sprg1@l(r8); \ - mfspr r10,SPRG4R; \ - stw r10,mcheck_sprg4@l(r8); \ - mfspr r10,SPRG5R; \ - stw r10,mcheck_sprg5@l(r8); \ - mfspr r10,SPRG7R; \ - stw r10,mcheck_sprg7@l(r8); \ - mfspr r10,SPRN_PID; \ - stw r10,mcheck_pid@l(r8); \ - mfspr r10,SRR0; \ - stw r10,mcheck_srr0@l(r8); \ - mfspr r10,SRR1; \ - stw r10,mcheck_srr1@l(r8); \ - mfspr r10,CSRR0; \ - stw r10,mcheck_csrr0@l(r8); \ - mfspr r10,CSRR1; \ - stw r10,mcheck_csrr1@l(r8); \ - mfspr r8,SPRG6R; /* SPRG6 used in machine checks */ \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - lis r11,mcheck_stack_top@h; \ - ori r11,r11,mcheck_stack_top@l; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,MCSRR0; \ - stw r1,GPR1(r11); \ - mfspr r9,MCSRR1; \ - stw r1,0(r11); \ - tovirt(r1,r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Exception vectors. - */ -#define START_EXCEPTION(label) \ - .align 5; \ -label: - -#define FINISH_EXCEPTION(func) \ - bl transfer_to_handler_full; \ - .long func; \ - .long ret_from_except_full - -#define EXCEPTION(n, label, hdlr, xfer) \ - START_EXCEPTION(label); \ - NORMAL_EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - xfer(n, hdlr) - -#define CRITICAL_EXCEPTION(n, label, hdlr) \ - START_EXCEPTION(label); \ - CRITICAL_EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define MCHECK_EXCEPTION(n, label, hdlr) \ - START_EXCEPTION(label); \ - MCHECK_EXCEPTION_PROLOG; \ - lis r4,MCSR_MCS@h; \ - mtspr SPRN_MCSR,r4; \ - mfspr r5,SPRN_ESR; \ - stw r5,_ESR(r11); \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - NOCOPY, mcheck_transfer_to_handler, \ - ret_from_mcheck_exc) - -#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \ - li r10,trap; \ - stw r10,TRAP(r11); \ - lis r10,msr@h; \ - ori r10,r10,msr@l; \ - copyee(r10, r9); \ - bl tfer; \ - .long hdlr; \ - .long ret - -#define COPY_EE(d, s) rlwimi d,s,0,16,16 -#define NOCOPY(d, s) - -#define EXC_XFER_STD(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \ - ret_from_except) - -#define EXC_XFER_EE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_EE_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ - ret_from_except) - interrupt_base: /* Critical Input Interrupt */ CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException) diff -puN /dev/null arch/ppc/kernel/head_booke.h --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/arch/ppc/kernel/head_booke.h 2004-08-25 19:24:19.524554160 -0700 @@ -0,0 +1,240 @@ +#ifndef __HEAD_BOOKE_H__ +#define __HEAD_BOOKE_H__ + +/* + * Macros used for common Book-e exception handling + */ + +#define SET_IVOR(vector_number, vector_label) \ + li r26,vector_label@l; \ + mtspr SPRN_IVOR##vector_number,r26; \ + sync + +#define NORMAL_EXCEPTION_PROLOG \ + mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ + mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG4W,r1; \ + mfcr r10; /* save CR in r10 for now */\ + mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ + andi. r11,r11,MSR_PR; \ + beq 1f; \ + mfspr r1,SPRG3; /* if from user, start at top of */\ + lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ + addi r1,r1,THREAD_SIZE; \ +1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ + tophys(r11,r1); \ + stw r10,_CCR(r11); /* save various registers */\ + stw r12,GPR12(r11); \ + stw r9,GPR9(r11); \ + mfspr r10,SPRG0; \ + stw r10,GPR10(r11); \ + mfspr r12,SPRG1; \ + stw r12,GPR11(r11); \ + mflr r10; \ + stw r10,_LINK(r11); \ + mfspr r10,SPRG4R; \ + mfspr r12,SRR0; \ + stw r10,GPR1(r11); \ + mfspr r9,SRR1; \ + stw r10,0(r11); \ + rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ + stw r0,GPR0(r11); \ + SAVE_4GPRS(3, r11); \ + SAVE_2GPRS(7, r11) + +/* + * Exception prolog for critical exceptions. This is a little different + * from the normal exception prolog above since a critical exception + * can potentially occur at any point during normal exception processing. + * Thus we cannot use the same SPRG registers as the normal prolog above. + * Instead we use a couple of words of memory at low physical addresses. + * This is OK since we don't support SMP on these processors. For Book E + * processors, we also have a reserved register (SPRG2) that is only used + * in critical exceptions so we can free up a GPR to use as the base for + * indirect access to the critical exception save area. This is necessary + * since the MMU is always on and the save area is offset from KERNELBASE. + */ +#define CRITICAL_EXCEPTION_PROLOG \ + mtspr SPRG2,r8; /* SPRG2 only used in criticals */ \ + lis r8,crit_save@ha; \ + stw r10,crit_r10@l(r8); \ + stw r11,crit_r11@l(r8); \ + mfspr r10,SPRG0; \ + stw r10,crit_sprg0@l(r8); \ + mfspr r10,SPRG1; \ + stw r10,crit_sprg1@l(r8); \ + mfspr r10,SPRG4R; \ + stw r10,crit_sprg4@l(r8); \ + mfspr r10,SPRG5R; \ + stw r10,crit_sprg5@l(r8); \ + mfspr r10,SPRG7R; \ + stw r10,crit_sprg7@l(r8); \ + mfspr r10,SPRN_PID; \ + stw r10,crit_pid@l(r8); \ + mfspr r10,SRR0; \ + stw r10,crit_srr0@l(r8); \ + mfspr r10,SRR1; \ + stw r10,crit_srr1@l(r8); \ + mfspr r8,SPRG2; /* SPRG2 only used in criticals */ \ + mfcr r10; /* save CR in r10 for now */\ + mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\ + andi. r11,r11,MSR_PR; \ + lis r11,critical_stack_top@h; \ + ori r11,r11,critical_stack_top@l; \ + beq 1f; \ + /* COMING FROM USER MODE */ \ + mfspr r11,SPRG3; /* if from user, start at top of */\ + lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ + addi r11,r11,THREAD_SIZE; \ +1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ + stw r10,_CCR(r11); /* save various registers */\ + stw r12,GPR12(r11); \ + stw r9,GPR9(r11); \ + mflr r10; \ + stw r10,_LINK(r11); \ + mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ + stw r12,_DEAR(r11); /* since they may have had stuff */\ + mfspr r9,SPRN_ESR; /* in them at the point where the */\ + stw r9,_ESR(r11); /* exception was taken */\ + mfspr r12,CSRR0; \ + stw r1,GPR1(r11); \ + mfspr r9,CSRR1; \ + stw r1,0(r11); \ + tovirt(r1,r11); \ + rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ + stw r0,GPR0(r11); \ + SAVE_4GPRS(3, r11); \ + SAVE_2GPRS(7, r11) + +/* + * Exception prolog for machine check exceptions. This is similar to + * the critical exception prolog, except that machine check exceptions + * have their own save area. For Book E processors, we also have a + * reserved register (SPRG6) that is only used in machine check exceptions + * so we can free up a GPR to use as the base for indirect access to the + * machine check exception save area. This is necessary since the MMU + * is always on and the save area is offset from KERNELBASE. + */ +#define MCHECK_EXCEPTION_PROLOG \ + mtspr SPRG6W,r8; /* SPRG6 used in machine checks */ \ + lis r8,mcheck_save@ha; \ + stw r10,mcheck_r10@l(r8); \ + stw r11,mcheck_r11@l(r8); \ + mfspr r10,SPRG0; \ + stw r10,mcheck_sprg0@l(r8); \ + mfspr r10,SPRG1; \ + stw r10,mcheck_sprg1@l(r8); \ + mfspr r10,SPRG4R; \ + stw r10,mcheck_sprg4@l(r8); \ + mfspr r10,SPRG5R; \ + stw r10,mcheck_sprg5@l(r8); \ + mfspr r10,SPRG7R; \ + stw r10,mcheck_sprg7@l(r8); \ + mfspr r10,SPRN_PID; \ + stw r10,mcheck_pid@l(r8); \ + mfspr r10,SRR0; \ + stw r10,mcheck_srr0@l(r8); \ + mfspr r10,SRR1; \ + stw r10,mcheck_srr1@l(r8); \ + mfspr r10,CSRR0; \ + stw r10,mcheck_csrr0@l(r8); \ + mfspr r10,CSRR1; \ + stw r10,mcheck_csrr1@l(r8); \ + mfspr r8,SPRG6R; /* SPRG6 used in machine checks */ \ + mfcr r10; /* save CR in r10 for now */\ + mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\ + andi. r11,r11,MSR_PR; \ + lis r11,mcheck_stack_top@h; \ + ori r11,r11,mcheck_stack_top@l; \ + beq 1f; \ + /* COMING FROM USER MODE */ \ + mfspr r11,SPRG3; /* if from user, start at top of */\ + lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ + addi r11,r11,THREAD_SIZE; \ +1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ + stw r10,_CCR(r11); /* save various registers */\ + stw r12,GPR12(r11); \ + stw r9,GPR9(r11); \ + mflr r10; \ + stw r10,_LINK(r11); \ + mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ + stw r12,_DEAR(r11); /* since they may have had stuff */\ + mfspr r9,SPRN_ESR; /* in them at the point where the */\ + stw r9,_ESR(r11); /* exception was taken */\ + mfspr r12,MCSRR0; \ + stw r1,GPR1(r11); \ + mfspr r9,MCSRR1; \ + stw r1,0(r11); \ + tovirt(r1,r11); \ + rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ + stw r0,GPR0(r11); \ + SAVE_4GPRS(3, r11); \ + SAVE_2GPRS(7, r11) + +/* + * Exception vectors. + */ +#define START_EXCEPTION(label) \ + .align 5; \ +label: + +#define FINISH_EXCEPTION(func) \ + bl transfer_to_handler_full; \ + .long func; \ + .long ret_from_except_full + +#define EXCEPTION(n, label, hdlr, xfer) \ + START_EXCEPTION(label); \ + NORMAL_EXCEPTION_PROLOG; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + xfer(n, hdlr) + +#define CRITICAL_EXCEPTION(n, label, hdlr) \ + START_EXCEPTION(label); \ + CRITICAL_EXCEPTION_PROLOG; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ + NOCOPY, transfer_to_handler_full, \ + ret_from_except_full) + +#define MCHECK_EXCEPTION(n, label, hdlr) \ + START_EXCEPTION(label); \ + MCHECK_EXCEPTION_PROLOG; \ + mfspr r5,SPRN_ESR; \ + stw r5,_ESR(r11); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ + NOCOPY, mcheck_transfer_to_handler, \ + ret_from_mcheck_exc) + +#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \ + li r10,trap; \ + stw r10,TRAP(r11); \ + lis r10,msr@h; \ + ori r10,r10,msr@l; \ + copyee(r10, r9); \ + bl tfer; \ + .long hdlr; \ + .long ret + +#define COPY_EE(d, s) rlwimi d,s,0,16,16 +#define NOCOPY(d, s) + +#define EXC_XFER_STD(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \ + ret_from_except) + +#define EXC_XFER_EE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_EE_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ + ret_from_except) + + +#endif /* __HEAD_BOOKE_H__ */ diff -puN arch/ppc/kernel/head_e500.S~ppc32-refactor-common-book-e-exception-handling-macros arch/ppc/kernel/head_e500.S --- 25/arch/ppc/kernel/head_e500.S~ppc32-refactor-common-book-e-exception-handling-macros 2004-08-25 19:24:19.517555224 -0700 +++ 25-akpm/arch/ppc/kernel/head_e500.S 2004-08-25 19:24:19.527553704 -0700 @@ -41,15 +41,7 @@ #include #include #include - -/* - * Macros - */ - -#define SET_IVOR(vector_number, vector_label) \ - li r26,vector_label@l; \ - mtspr SPRN_IVOR##vector_number,r26; \ - sync +#include "head_booke.h" /* As with the other PowerPC ports, it is expected that when code * execution begins here, the following registers contain valid, yet @@ -371,232 +363,6 @@ skpinv: addi r6,r6,1 /* Increment */ * We align on a 32 byte cache line boundary for good measure. */ -#define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG4W,r1; \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - beq 1f; \ - mfspr r1,SPRG3; /* if from user, start at top of */\ - lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ - addi r1,r1,THREAD_SIZE; \ -1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ - tophys(r11,r1); \ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mfspr r10,SPRG0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRG1; \ - stw r12,GPR11(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r10,SPRG4R; \ - mfspr r12,SRR0; \ - stw r10,GPR1(r11); \ - mfspr r9,SRR1; \ - stw r10,0(r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a couple of words of memory at low physical addresses. - * This is OK since we don't support SMP on these processors. For Book E - * processors, we also have a reserved register (SPRG2) that is only used - * in critical exceptions so we can free up a GPR to use as the base for - * indirect access to the critical exception save area. This is necessary - * since the MMU is always on and the save area is offset from KERNELBASE. - */ -#define CRITICAL_EXCEPTION_PROLOG \ - mtspr SPRG2,r8; /* SPRG2 only used in criticals */ \ - lis r8,crit_save@ha; \ - stw r10,crit_r10@l(r8); \ - stw r11,crit_r11@l(r8); \ - mfspr r10,SPRG0; \ - stw r10,crit_sprg0@l(r8); \ - mfspr r10,SPRG1; \ - stw r10,crit_sprg1@l(r8); \ - mfspr r10,SPRG4R; \ - stw r10,crit_sprg4@l(r8); \ - mfspr r10,SPRG5R; \ - stw r10,crit_sprg5@l(r8); \ - mfspr r10,SPRG7R; \ - stw r10,crit_sprg7@l(r8); \ - mfspr r10,SPRN_PID; \ - stw r10,crit_pid@l(r8); \ - mfspr r10,SRR0; \ - stw r10,crit_srr0@l(r8); \ - mfspr r10,SRR1; \ - stw r10,crit_srr1@l(r8); \ - mfspr r8,SPRG2; /* SPRG2 only used in criticals */ \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - lis r11,critical_stack_top@h; \ - ori r11,r11,critical_stack_top@l; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,CSRR0; \ - stw r1,GPR1(r11); \ - mfspr r9,CSRR1; \ - stw r1,0(r11); \ - tovirt(r1,r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Exception prolog for machine check exceptions. This is similar to - * the critical exception prolog, except that machine check exceptions - * have their own save area. For Book E processors, we also have a - * reserved register (SPRG6) that is only used in machine check exceptions - * so we can free up a GPR to use as the base for indirect access to the - * machine check exception save area. This is necessary since the MMU - * is always on and the save area is offset from KERNELBASE. - */ -#define MCHECK_EXCEPTION_PROLOG \ - mtspr SPRG6W,r8; /* SPRG6 used in machine checks */ \ - lis r8,mcheck_save@ha; \ - stw r10,mcheck_r10@l(r8); \ - stw r11,mcheck_r11@l(r8); \ - mfspr r10,SPRG0; \ - stw r10,mcheck_sprg0@l(r8); \ - mfspr r10,SPRG1; \ - stw r10,mcheck_sprg1@l(r8); \ - mfspr r10,SPRG4R; \ - stw r10,mcheck_sprg4@l(r8); \ - mfspr r10,SPRG5R; \ - stw r10,mcheck_sprg5@l(r8); \ - mfspr r10,SPRG7R; \ - stw r10,mcheck_sprg7@l(r8); \ - mfspr r10,SPRN_PID; \ - stw r10,mcheck_pid@l(r8); \ - mfspr r10,SRR0; \ - stw r10,mcheck_srr0@l(r8); \ - mfspr r10,SRR1; \ - stw r10,mcheck_srr1@l(r8); \ - mfspr r10,CSRR0; \ - stw r10,mcheck_csrr0@l(r8); \ - mfspr r10,CSRR1; \ - stw r10,mcheck_csrr1@l(r8); \ - mfspr r8,SPRG6R; /* SPRG6 used in machine checks */ \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - lis r11,mcheck_stack_top@h; \ - ori r11,r11,mcheck_stack_top@l; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,MCSRR0; \ - stw r1,GPR1(r11); \ - mfspr r9,MCSRR1; \ - stw r1,0(r11); \ - tovirt(r1,r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Exception vectors. - */ -#define START_EXCEPTION(label) \ - .align 5; \ -label: - -#define FINISH_EXCEPTION(func) \ - bl transfer_to_handler_full; \ - .long func; \ - .long ret_from_except_full - -#define EXCEPTION(n, label, hdlr, xfer) \ - START_EXCEPTION(label); \ - NORMAL_EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - xfer(n, hdlr) - -#define CRITICAL_EXCEPTION(n, label, hdlr) \ - START_EXCEPTION(label); \ - CRITICAL_EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define MCHECK_EXCEPTION(n, label, hdlr) \ - START_EXCEPTION(label); \ - MCHECK_EXCEPTION_PROLOG; \ - mfspr r5,SPRN_ESR; \ - stw r5,_ESR(r11); \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - NOCOPY, mcheck_transfer_to_handler, \ - ret_from_mcheck_exc) - -#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \ - li r10,trap; \ - stw r10,TRAP(r11); \ - lis r10,msr@h; \ - ori r10,r10,msr@l; \ - copyee(r10, r9); \ - bl tfer; \ - .long hdlr; \ - .long ret - -#define COPY_EE(d, s) rlwimi d,s,0,16,16 -#define NOCOPY(d, s) - -#define EXC_XFER_STD(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \ - ret_from_except) - -#define EXC_XFER_EE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_EE_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ - ret_from_except) - interrupt_base: /* Critical Input Interrupt */ CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException) _