This is Info file ../info/emacs, produced by Makeinfo version 1.68 from the input file ../texi/emacs.texi. This is the thirteenth edition of the `GNU Emacs Manual', updated for Emacs version 20.7. INFO-DIR-SECTION Editors START-INFO-DIR-ENTRY * Emacs: (emacs). The extensible self-documenting text editor. END-INFO-DIR-ENTRY Published by the Free Software Foundation 59 Temple Place, Suite 330 Boston, MA 02111-1307 USA Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1996, 1997, 1998, 1999 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled "The GNU Manifesto", "Distribution" and "GNU General Public License" are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "The GNU Manifesto", "Distribution" and "GNU General Public License" may be included in a translation approved by the Free Software Foundation instead of in the original English.  File: emacs, Node: Dired Updating, Next: Dired and Find, Prev: Hiding Subdirectories, Up: Dired Updating the Dired Buffer ========================= This section describes commands to update the Dired buffer to reflect outside (non-Dired) changes in the directories and files, and to delete part of the Dired buffer. `g' Update the entire contents of the Dired buffer (`revert-buffer'). `l' Update the specified files (`dired-do-redisplay'). `k' Delete the specified *file lines*--not the files, just the lines (`dired-do-kill-lines'). `s' Toggle between alphabetical order and date/time order (`dired-sort-toggle-or-edit'). `C-u s SWITCHES ' Refresh the Dired buffer using SWITCHES as `dired-listing-switches'. Type `g' (`revert-buffer') to update the contents of the Dired buffer, based on changes in the files and directories listed. This preserves all marks except for those on files that have vanished. Hidden subdirectories are updated but remain hidden. To update only some of the files, type `l' (`dired-do-redisplay'). This command applies to the next N files, or to the marked files if any, or to the current file. Updating them means reading their current status from the file system and changing the buffer to reflect it properly. If you use `l' on a subdirectory header line, it updates the contents of the corresponding subdirectory. To delete the specified *file lines*--not the files, just the lines--type `k' (`dired-do-kill-lines'). With a numeric argument N, this command applies to the next N files; otherwise, it applies to the marked files. If you kill the line for a file that is a directory, the directory's contents are also deleted from the buffer. Typing `C-u k' on the header line for a subdirectory is another way to delete a subdirectory from the Dired buffer. The `g' command brings back any individual lines that you have killed in this way, but not subdirectories--you must use `i' to reinsert each subdirectory. The files in a Dired buffers are normally listed in alphabetical order by file names. Alternatively Dired can sort them by date/time. The Dired command `s' (`dired-sort-toggle-or-edit') switches between these two sorting modes. The mode line in a Dired buffer indicates which way it is currently sorted--by name, or by date. `C-u s SWITCHES ' lets you specify a new value for `dired-listing-switches'.  File: emacs, Node: Dired and Find, Prev: Dired Updating, Up: Dired Dired and `find' ================ You can select a set of files for display in a Dired buffer more flexibly by using the `find' utility to choose the files. To search for files with names matching a wildcard pattern use `M-x find-name-dired'. It reads arguments DIRECTORY and PATTERN, and chooses all the files in DIRECTORY or its subdirectories whose individual names match PATTERN. The files thus chosen are displayed in a Dired buffer in which the ordinary Dired commands are available. If you want to test the contents of files, rather than their names, use `M-x find-grep-dired'. This command reads two minibuffer arguments, DIRECTORY and REGEXP; it chooses all the files in DIRECTORY or its subdirectories that contain a match for REGEXP. It works by running the programs `find' and `grep'. See also `M-x grep-find', in *Note Compilation::. Remember to write the regular expression for `grep', not for Emacs. The most general command in this series is `M-x find-dired', which lets you specify any condition that `find' can test. It takes two minibuffer arguments, DIRECTORY and FIND-ARGS; it runs `find' in DIRECTORY, passing FIND-ARGS to tell `find' what condition to test. To use this command, you need to know how to use `find'. The format of listing produced by these commands is controlled by the variable `find-ls-option', whose default value specifies using options `-ld' for `ls'. If your listings are corrupted, you may need to change the value of this variable.  File: emacs, Node: Calendar/Diary, Next: Gnus, Prev: Dired, Up: Top The Calendar and the Diary ************************** Emacs provides the functions of a desk calendar, with a diary of planned or past events. To enter the calendar, type `M-x calendar'; this displays a three-month calendar centered on the current month, with point on the current date. With a numeric argument, as in `C-u M-x calendar', it prompts you for the month and year to be the center of the three-month calendar. The calendar uses its own buffer, whose major mode is Calendar mode. `Mouse-2' in the calendar brings up a menu of operations on a particular date; `C-Mouse-3' brings up a menu of commonly used calendar features that are independent of any particular date. To exit the calendar, type `q'. *Note Customizing the Calendar and Diary: (elisp)Calendar, for customization information about the calendar and diary. * Menu: * Calendar Motion:: Moving through the calendar; selecting a date. * Scroll Calendar:: Bringing earlier or later months onto the screen. * Counting Days:: How many days are there between two dates? * General Calendar:: Exiting or recomputing the calendar. * LaTeX Calendar:: Print a calendar using LaTeX. * Holidays:: Displaying dates of holidays. * Sunrise/Sunset:: Displaying local times of sunrise and sunset. * Lunar Phases:: Displaying phases of the moon. * Other Calendars:: Converting dates to other calendar systems. * Diary:: Displaying events from your diary. * Appointments:: Reminders when it's time to do something. * Daylight Savings:: How to specify when daylight savings time is active.  File: emacs, Node: Calendar Motion, Next: Scroll Calendar, Up: Calendar/Diary Movement in the Calendar ======================== Calendar mode lets you move through the calendar in logical units of time such as days, weeks, months, and years. If you move outside the three months originally displayed, the calendar display "scrolls" automatically through time to make the selected date visible. Moving to a date lets you view its holidays or diary entries, or convert it to other calendars; moving longer time periods is also useful simply to scroll the calendar. * Menu: * Calendar Unit Motion:: Moving by days, weeks, months, and years. * Move to Beginning or End:: Moving to start/end of weeks, months, and years. * Specified Dates:: Moving to the current date or another specific date.  File: emacs, Node: Calendar Unit Motion, Next: Move to Beginning or End, Up: Calendar Motion Motion by Standard Lengths of Time ---------------------------------- The commands for movement in the calendar buffer parallel the commands for movement in text. You can move forward and backward by days, weeks, months, and years. `C-f' Move point one day forward (`calendar-forward-day'). `C-b' Move point one day backward (`calendar-backward-day'). `C-n' Move point one week forward (`calendar-forward-week'). `C-p' Move point one week backward (`calendar-backward-week'). `M-}' Move point one month forward (`calendar-forward-month'). `M-{' Move point one month backward (`calendar-backward-month'). `C-x ]' Move point one year forward (`calendar-forward-year'). `C-x [' Move point one year backward (`calendar-backward-year'). The day and week commands are natural analogues of the usual Emacs commands for moving by characters and by lines. Just as `C-n' usually moves to the same column in the following line, in Calendar mode it moves to the same day in the following week. And `C-p' moves to the same day in the previous week. The arrow keys are equivalent to `C-f', `C-b', `C-n' and `C-p', just as they normally are in other modes. The commands for motion by months and years work like those for weeks, but move a larger distance. The month commands `M-}' and `M-{' move forward or backward by an entire month's time. The year commands `C-x ]' and `C-x [' move forward or backward a whole year. The easiest way to remember these commands is to consider months and years analogous to paragraphs and pages of text, respectively. But the commands themselves are not quite analogous. The ordinary Emacs paragraph commands move to the beginning or end of a paragraph, whereas these month and year commands move by an entire month or an entire year, which usually involves skipping across the end of a month or year. All these commands accept a numeric argument as a repeat count. For convenience, the digit keys and the minus sign specify numeric arguments in Calendar mode even without the Meta modifier. For example, `100 C-f' moves point 100 days forward from its present location.  File: emacs, Node: Move to Beginning or End, Next: Specified Dates, Prev: Calendar Unit Motion, Up: Calendar Motion Beginning or End of Week, Month or Year --------------------------------------- A week (or month, or year) is not just a quantity of days; we think of weeks (months, years) as starting on particular dates. So Calendar mode provides commands to move to the beginning or end of a week, month or year: `C-a' Move point to start of week (`calendar-beginning-of-week'). `C-e' Move point to end of week (`calendar-end-of-week'). `M-a' Move point to start of month (`calendar-beginning-of-month'). `M-e' Move point to end of month (`calendar-end-of-month'). `M-<' Move point to start of year (`calendar-beginning-of-year'). `M->' Move point to end of year (`calendar-end-of-year'). These commands also take numeric arguments as repeat counts, with the repeat count indicating how many weeks, months, or years to move backward or forward. By default, weeks begin on Sunday. To make them begin on Monday instead, set the variable `calendar-week-start-day' to 1.  File: emacs, Node: Specified Dates, Prev: Move to Beginning or End, Up: Calendar Motion Specified Dates --------------- Calendar mode provides commands for moving to a particular date specified in various ways. `g d' Move point to specified date (`calendar-goto-date'). `o' Center calendar around specified month (`calendar-other-month'). `.' Move point to today's date (`calendar-goto-today'). `g d' (`calendar-goto-date') prompts for a year, a month, and a day of the month, and then moves to that date. Because the calendar includes all dates from the beginning of the current era, you must type the year in its entirety; that is, type `1990', not `90'. `o' (`calendar-other-month') prompts for a month and year, then centers the three-month calendar around that month. You can return to today's date with `.' (`calendar-goto-today').  File: emacs, Node: Scroll Calendar, Next: Counting Days, Prev: Calendar Motion, Up: Calendar/Diary Scrolling in the Calendar ========================= The calendar display scrolls automatically through time when you move out of the visible portion. You can also scroll it manually. Imagine that the calendar window contains a long strip of paper with the months on it. Scrolling it means moving the strip so that new months become visible in the window. `C-x <' Scroll calendar one month forward (`scroll-calendar-left'). `C-x >' Scroll calendar one month backward (`scroll-calendar-right'). `C-v' `' Scroll calendar three months forward (`scroll-calendar-left-three-months'). `M-v' `' Scroll calendar three months backward (`scroll-calendar-right-three-months'). The most basic calendar scroll commands scroll by one month at a time. This means that there are two months of overlap between the display before the command and the display after. `C-x <' scrolls the calendar contents one month to the left; that is, it moves the display forward in time. `C-x >' scrolls the contents to the right, which moves backwards in time. The commands `C-v' and `M-v' scroll the calendar by an entire "screenful"--three months--in analogy with the usual meaning of these commands. `C-v' makes later dates visible and `M-v' makes earlier dates visible. These commands take a numeric argument as a repeat count; in particular, since `C-u' multiplies the next command by four, typing `C-u C-v' scrolls the calendar forward by a year and typing `C-u M-v' scrolls the calendar backward by a year. The function keys and are equivalent to `C-v' and `M-v', just as they are in other modes.  File: emacs, Node: Counting Days, Next: General Calendar, Prev: Scroll Calendar, Up: Calendar/Diary Counting Days ============= `M-=' Display the number of days in the current region (`calendar-count-days-region'). To determine the number of days in the region, type `M-=' (`calendar-count-days-region'). The numbers of days printed is *inclusive*; that is, it includes the days specified by mark and point.  File: emacs, Node: General Calendar, Next: LaTeX Calendar, Prev: Counting Days, Up: Calendar/Diary Miscellaneous Calendar Commands =============================== `p d' Display day-in-year (`calendar-print-day-of-year'). `C-c C-l' Regenerate the calendar window (`redraw-calendar'). `SPC' Scroll the next window (`scroll-other-window'). `q' Exit from calendar (`exit-calendar'). To print the number of days elapsed since the start of the year, or the number of days remaining in the year, type the `p d' command (`calendar-print-day-of-year'). This displays both of those numbers in the echo area. The number of days elapsed includes the selected date. The number of days remaining does not include that date. If the calendar window text gets corrupted, type `C-c C-l' (`redraw-calendar') to redraw it. (This can only happen if you use non-Calendar-mode editing commands.) In Calendar mode, you can use `SPC' (`scroll-other-window') to scroll the other window. This is handy when you display a list of holidays or diary entries in another window. To exit from the calendar, type `q' (`exit-calendar'). This buries all buffers related to the calendar, selecting other buffers. (If a frame contains a dedicated calendar window, exiting from the calendar iconifies that frame.)  File: emacs, Node: LaTeX Calendar, Next: Holidays, Prev: General Calendar, Up: Calendar/Diary LaTeX Calendar ============== The Calendar LaTeX commands produce a buffer of LaTeX code that prints as a calendar. Depending on the command you use, the printed calendar covers the day, week, month or year that point is in. `t m' Generate a one-month calendar (`cal-tex-cursor-month'). `t M' Generate a sideways-printing one-month calendar (`cal-tex-cursor-month-landscape'). `t d' Generate a one-day calendar (`cal-tex-cursor-day'). `t w 1' Generate a one-page calendar for one week (`cal-tex-cursor-week'). `t w 2' Generate a two-page calendar for one week (`cal-tex-cursor-week2'). `t w 3' Generate an ISO-style calendar for one week (`cal-tex-cursor-week-iso'). `t w 4' Generate a calendar for one Monday-starting week (`cal-tex-cursor-week-monday'). `t f w' Generate a Filofax-style two-weeks-at-a-glance calendar (`cal-tex-cursor-filofax-2week'). `t f W' Generate a Filofax-style one-week-at-a-glance calendar (`cal-tex-cursor-filofax-week'). `t y' Generate a calendar for one year (`cal-tex-cursor-year'). `t Y' Generate a sideways-printing calendar for one year (`cal-tex-cursor-year-landscape'). `t f y' Generate a Filofax-style calendar for one year (`cal-tex-cursor-filofax-year'). Some of these commands print the calendar sideways (in "landscape mode"), so it can be wider than it is long. Some of them use Filofax paper size (3.75in x 6.75in). All of these commands accept a prefix argument which specifies how many days, weeks, months or years to print (starting always with the selected one). If the variable `cal-tex-holidays' is non-`nil' (the default), then the printed calendars show the holidays in `calendar-holidays'. If the variable `cal-tex-diary' is non-`nil' (the default is `nil'), diary entries are included also (in weekly and monthly calendars only).  File: emacs, Node: Holidays, Next: Sunrise/Sunset, Prev: LaTeX Calendar, Up: Calendar/Diary Holidays ======== The Emacs calendar knows about all major and many minor holidays, and can display them. `h' Display holidays for the selected date (`calendar-cursor-holidays'). `Mouse-2 Holidays' Display any holidays for the date you click on. `x' Mark holidays in the calendar window (`mark-calendar-holidays'). `u' Unmark calendar window (`calendar-unmark'). `a' List all holidays for the displayed three months in another window (`list-calendar-holidays'). `M-x holidays' List all holidays for three months around today's date in another window. `M-x list-holidays' List holidays in another window for a specified range of years. To see if any holidays fall on a given date, position point on that date in the calendar window and use the `h' command. Alternatively, click on that date with `Mouse-2' and then choose `Holidays' from the menu that appears. Either way, this displays the holidays for that date, in the echo area if they fit there, otherwise in a separate window. To view the distribution of holidays for all the dates shown in the calendar, use the `x' command. This displays the dates that are holidays in a different face (or places a `*' after these dates, if display with multiple faces is not available). The command applies both to the currently visible months and to other months that subsequently become visible by scrolling. To turn marking off and erase the current marks, type `u', which also erases any diary marks (*note Diary::.). To get even more detailed information, use the `a' command, which displays a separate buffer containing a list of all holidays in the current three-month range. You can use in the calendar window to scroll that list. The command `M-x holidays' displays the list of holidays for the current month and the preceding and succeeding months; this works even if you don't have a calendar window. If you want the list of holidays centered around a different month, use `C-u M-x holidays', which prompts for the month and year. The holidays known to Emacs include United States holidays and the major Christian, Jewish, and Islamic holidays; also the solstices and equinoxes. The command `M-x list-holidays' displays the list of holidays for a range of years. This function asks you for the starting and stopping years, and allows you to choose all the holidays or one of several categories of holidays. You can use this command even if you don't have a calendar window. The dates used by Emacs for holidays are based on *current practice*, not historical fact. Historically, for instance, the start of daylight savings time and even its existence have varied from year to year, but present United States law mandates that daylight savings time begins on the first Sunday in April. When the daylight savings rules are set up for the United States, Emacs always uses the present definition, even though it is wrong for some prior years.  File: emacs, Node: Sunrise/Sunset, Next: Lunar Phases, Prev: Holidays, Up: Calendar/Diary Times of Sunrise and Sunset =========================== Special calendar commands can tell you, to within a minute or two, the times of sunrise and sunset for any date. `S' Display times of sunrise and sunset for the selected date (`calendar-sunrise-sunset'). `Mouse-2 Sunrise/Sunset' Display times of sunrise and sunset for the date you click on. `M-x sunrise-sunset' Display times of sunrise and sunset for today's date. `C-u M-x sunrise-sunset' Display times of sunrise and sunset for a specified date. Within the calendar, to display the *local times* of sunrise and sunset in the echo area, move point to the date you want, and type `S'. Alternatively, click `Mouse-2' on the date, then choose `Sunrise/Sunset' from the menu that appears. The command `M-x sunrise-sunset' is available outside the calendar to display this information for today's date or a specified date. To specify a date other than today, use `C-u M-x sunrise-sunset', which prompts for the year, month, and day. You can display the times of sunrise and sunset for any location and any date with `C-u C-u M-x sunrise-sunset'. This asks you for a longitude, latitude, number of minutes difference from Coordinated Universal Time, and date, and then tells you the times of sunrise and sunset for that location on that date. Because the times of sunrise and sunset depend on the location on earth, you need to tell Emacs your latitude, longitude, and location name before using these commands. Here is an example of what to set: (setq calendar-latitude 40.1) (setq calendar-longitude -88.2) (setq calendar-location-name "Urbana, IL") Use one decimal place in the values of `calendar-latitude' and `calendar-longitude'. Your time zone also affects the local time of sunrise and sunset. Emacs usually gets time zone information from the operating system, but if these values are not what you want (or if the operating system does not supply them), you must set them yourself. Here is an example: (setq calendar-time-zone -360) (setq calendar-standard-time-zone-name "CST") (setq calendar-daylight-time-zone-name "CDT") The value of `calendar-time-zone' is the number of minutes difference between your local standard time and Coordinated Universal Time (Greenwich time). The values of `calendar-standard-time-zone-name' and `calendar-daylight-time-zone-name' are the abbreviations used in your time zone. Emacs displays the times of sunrise and sunset *corrected for daylight savings time*. *Note Daylight Savings::, for how daylight savings time is determined. As a user, you might find it convenient to set the calendar location variables for your usual physical location in your `.emacs' file. And when you install Emacs on a machine, you can create a `default.el' file which sets them properly for the typical location of most users of that machine. *Note Init File::.  File: emacs, Node: Lunar Phases, Next: Other Calendars, Prev: Sunrise/Sunset, Up: Calendar/Diary Phases of the Moon ================== These calendar commands display the dates and times of the phases of the moon (new moon, first quarter, full moon, last quarter). This feature is useful for debugging problems that "depend on the phase of the moon." `M' Display the dates and times for all the quarters of the moon for the three-month period shown (`calendar-phases-of-moon'). `M-x phases-of-moon' Display dates and times of the quarters of the moon for three months around today's date. Within the calendar, use the `M' command to display a separate buffer of the phases of the moon for the current three-month range. The dates and times listed are accurate to within a few minutes. Outside the calendar, use the command `M-x phases-of-moon' to display the list of the phases of the moon for the current month and the preceding and succeeding months. For information about a different month, use `C-u M-x phases-of-moon', which prompts for the month and year. The dates and times given for the phases of the moon are given in local time (corrected for daylight savings, when appropriate); but if the variable `calendar-time-zone' is void, Coordinated Universal Time (the Greenwich time zone) is used. *Note Daylight Savings::.  File: emacs, Node: Other Calendars, Next: Diary, Prev: Lunar Phases, Up: Calendar/Diary Conversion To and From Other Calendars ====================================== The Emacs calendar displayed is *always* the Gregorian calendar, sometimes called the "new style" calendar, which is used in most of the world today. However, this calendar did not exist before the sixteenth century and was not widely used before the eighteenth century; it did not fully displace the Julian calendar and gain universal acceptance until the early twentieth century. The Emacs calendar can display any month since January, year 1 of the current era, but the calendar displayed is the Gregorian, even for a date at which the Gregorian calendar did not exist. While Emacs cannot display other calendars, it can convert dates to and from several other calendars. * Menu: * Calendar Systems:: The calendars Emacs understands (aside from Gregorian). * To Other Calendar:: Converting the selected date to various calendars. * From Other Calendar:: Moving to a date specified in another calendar. * Mayan Calendar:: Moving to a date specified in a Mayan calendar.  File: emacs, Node: Calendar Systems, Next: To Other Calendar, Up: Other Calendars Supported Calendar Systems -------------------------- The ISO commercial calendar is used largely in Europe. The Julian calendar, named after Julius Caesar, was the one used in Europe throughout medieval times, and in many countries up until the nineteenth century. Astronomers use a simple counting of days elapsed since noon, Monday, January 1, 4713 B.C. on the Julian calendar. The number of days elapsed is called the *Julian day number* or the *Astronomical day number*. The Hebrew calendar is used by tradition in the Jewish religion. The Emacs calendar program uses the Hebrew calendar to determine the dates of Jewish holidays. Hebrew calendar dates begin and end at sunset. The Islamic calendar is used in many predominantly Islamic countries. Emacs uses it to determine the dates of Islamic holidays. There is no universal agreement in the Islamic world about the calendar; Emacs uses a widely accepted version, but the precise dates of Islamic holidays often depend on proclamation by religious authorities, not on calculations. As a consequence, the actual dates of observance can vary slightly from the dates computed by Emacs. Islamic calendar dates begin and end at sunset. The French Revolutionary calendar was created by the Jacobins after the 1789 revolution, to represent a more secular and nature-based view of the annual cycle, and to install a 10-day week in a rationalization measure similar to the metric system. The French government officially abandoned this calendar at the end of 1805. The Maya of Central America used three separate, overlapping calendar systems, the *long count*, the *tzolkin*, and the *haab*. Emacs knows about all three of these calendars. Experts dispute the exact correlation between the Mayan calendar and our calendar; Emacs uses the Goodman-Martinez-Thompson correlation in its calculations. The Copts use a calendar based on the ancient Egyptian solar calendar. Their calendar consists of twelve 30-day months followed by an extra five-day period. Once every fourth year they add a leap day to this extra period to make it six days. The Ethiopic calendar is identical in structure, but has different year numbers and month names. The Persians use a solar calendar based on a design of Omar Khayyam. Their calendar consists of twelve months of which the first six have 31 days, the next five have 30 days, and the last has 29 in ordinary years and 30 in leap years. Leap years occur in a complicated pattern every four or five years. The Chinese calendar is a complicated system of lunar months arranged into solar years. The years go in cycles of sixty, each year containing either twelve months in an ordinary year or thirteen months in a leap year; each month has either 29 or 30 days. Years, ordinary months, and days are named by combining one of ten "celestial stems" with one of twelve "terrestrial branches" for a total of sixty names that are repeated in a cycle of sixty.  File: emacs, Node: To Other Calendar, Next: From Other Calendar, Prev: Calendar Systems, Up: Other Calendars Converting To Other Calendars ----------------------------- The following commands describe the selected date (the date at point) in various other calendar systems: `Mouse-2 Other Calendars' Display the date that you click on, expressed in various other calendars. `p c' Display ISO commercial calendar equivalent for selected day (`calendar-print-iso-date'). `p j' Display Julian date for selected day (`calendar-print-julian-date'). `p a' Display astronomical (Julian) day number for selected day (`calendar-print-astro-day-number'). `p h' Display Hebrew date for selected day (`calendar-print-hebrew-date'). `p i' Display Islamic date for selected day (`calendar-print-islamic-date'). `p f' Display French Revolutionary date for selected day (`calendar-print-french-date'). `p C' Display Chinese date for selected day (`calendar-print-chinese-date'). `p k' Display Coptic date for selected day (`calendar-print-coptic-date'). `p e' Display Ethiopic date for selected day (`calendar-print-ethiopic-date'). `p p' Display Persian date for selected day (`calendar-print-persian-date'). `p m' Display Mayan date for selected day (`calendar-print-mayan-date'). If you are using X, the easiest way to translate a date into other calendars is to click on it with `Mouse-2', then choose `Other Calendars' from the menu that appears. This displays the equivalent forms of the date in all the calendars Emacs understands, in the form of a menu. (Choosing an alternative from this menu doesn't actually do anything--the menu is used only for display.) Put point on the desired date of the Gregorian calendar, then type the appropriate keys. The `p' is a mnemonic for "print" since Emacs "prints" the equivalent date in the echo area.  File: emacs, Node: From Other Calendar, Next: Mayan Calendar, Prev: To Other Calendar, Up: Other Calendars Converting From Other Calendars ------------------------------- You can use the other supported calendars to specify a date to move to. This section describes the commands for doing this using calendars other than Mayan; for the Mayan calendar, see the following section. `g c' Move to a date specified in the ISO commercial calendar (`calendar-goto-iso-date'). `g j' Move to a date specified in the Julian calendar (`calendar-goto-julian-date'). `g a' Move to a date specified in astronomical (Julian) day number (`calendar-goto-astro-day-number'). `g h' Move to a date specified in the Hebrew calendar (`calendar-goto-hebrew-date'). `g i' Move to a date specified in the Islamic calendar (`calendar-goto-islamic-date'). `g f' Move to a date specified in the French Revolutionary calendar (`calendar-goto-french-date'). `g C' Move to a date specified in the Chinese calendar (`calendar-goto-chinese-date'). `g p' Move to a date specified in the Persian calendar (`calendar-goto-persian-date'). `g k' Move to a date specified in the Coptic calendar (`calendar-goto-coptic-date'). `g e' Move to a date specified in the Ethiopic calendar (`calendar-goto-ethiopic-date'). These commands ask you for a date on the other calendar, move point to the Gregorian calendar date equivalent to that date, and display the other calendar's date in the echo area. Emacs uses strict completion (*note Completion::.) whenever it asks you to type a month name, so you don't have to worry about the spelling of Hebrew, Islamic, or French names. One common question concerning the Hebrew calendar is the computation of the anniversary of a date of death, called a "yahrzeit." The Emacs calendar includes a facility for such calculations. If you are in the calendar, the command `M-x list-yahrzeit-dates' asks you for a range of years and then displays a list of the yahrzeit dates for those years for the date given by point. If you are not in the calendar, this command first asks you for the date of death and the range of years, and then displays the list of yahrzeit dates.  File: emacs, Node: Mayan Calendar, Prev: From Other Calendar, Up: Other Calendars Converting from the Mayan Calendar ---------------------------------- Here are the commands to select dates based on the Mayan calendar: `g m l' Move to a date specified by the long count calendar (`calendar-goto-mayan-long-count-date'). `g m n t' Move to the next occurrence of a place in the tzolkin calendar (`calendar-next-tzolkin-date'). `g m p t' Move to the previous occurrence of a place in the tzolkin calendar (`calendar-previous-tzolkin-date'). `g m n h' Move to the next occurrence of a place in the haab calendar (`calendar-next-haab-date'). `g m p h' Move to the previous occurrence of a place in the haab calendar (`calendar-previous-haab-date'). `g m n c' Move to the next occurrence of a place in the calendar round (`calendar-next-calendar-round-date'). `g m p c' Move to the previous occurrence of a place in the calendar round (`calendar-previous-calendar-round-date'). To understand these commands, you need to understand the Mayan calendars. The "long count" is a counting of days with these units: 1 kin = 1 day 1 uinal = 20 kin 1 tun = 18 uinal 1 katun = 20 tun 1 baktun = 20 katun Thus, the long count date 12.16.11.16.6 means 12 baktun, 16 katun, 11 tun, 16 uinal, and 6 kin. The Emacs calendar can handle Mayan long count dates as early as 7.17.18.13.1, but no earlier. When you use the `g m l' command, type the Mayan long count date with the baktun, katun, tun, uinal, and kin separated by periods. The Mayan tzolkin calendar is a cycle of 260 days formed by a pair of independent cycles of 13 and 20 days. Since this cycle repeats endlessly, Emacs provides commands to move backward and forward to the previous or next point in the cycle. Type `g m p t' to go to the previous tzolkin date; Emacs asks you for a tzolkin date and moves point to the previous occurrence of that date. Similarly, type `g m n t' to go to the next occurrence of a tzolkin date. The Mayan haab calendar is a cycle of 365 days arranged as 18 months of 20 days each, followed a 5-day monthless period. Like the tzolkin cycle, this cycle repeats endlessly, and there are commands to move backward and forward to the previous or next point in the cycle. Type `g m p h' to go to the previous haab date; Emacs asks you for a haab date and moves point to the previous occurrence of that date. Similarly, type `g m n h' to go to the next occurrence of a haab date. The Maya also used the combination of the tzolkin date and the haab date. This combination is a cycle of about 52 years called a *calendar round*. If you type `g m p c', Emacs asks you for both a haab and a tzolkin date and then moves point to the previous occurrence of that combination. Use `g m n c' to move point to the next occurrence of a combination. These commands signal an error if the haab/tzolkin date combination you have typed is impossible. Emacs uses strict completion (*note Strict Completion::.) whenever it asks you to type a Mayan name, so you don't have to worry about spelling.  File: emacs, Node: Diary, Next: Appointments, Prev: Other Calendars, Up: Calendar/Diary The Diary ========= The Emacs diary keeps track of appointments or other events on a daily basis, in conjunction with the calendar. To use the diary feature, you must first create a "diary file" containing a list of events and their dates. Then Emacs can automatically pick out and display the events for today, for the immediate future, or for any specified date. By default, Emacs uses `~/diary' as the diary file. This is the same file that the `calendar' utility uses. A sample `~/diary' file is: 12/22/1988 Twentieth wedding anniversary!! &1/1. Happy New Year! 10/22 Ruth's birthday. * 21, *: Payday Tuesday--weekly meeting with grad students at 10am Supowit, Shen, Bitner, and Kapoor to attend. 1/13/89 Friday the thirteenth!! &thu 4pm squash game with Lloyd. mar 16 Dad's birthday April 15, 1989 Income tax due. &* 15 time cards due. This example uses extra spaces to align the event descriptions of most of the entries. Such formatting is purely a matter of taste. Although you probably will start by creating a diary manually, Emacs provides a number of commands to let you view, add, and change diary entries. * Menu: * Diary Commands:: Viewing diary entries and associated calendar dates. * Format of Diary File:: Entering events in your diary. * Date Formats:: Various ways you can specify dates. * Adding to Diary:: Commands to create diary entries. * Special Diary Entries:: Anniversaries, blocks of dates, cyclic entries, etc.  File: emacs, Node: Diary Commands, Next: Format of Diary File, Up: Diary Commands Displaying Diary Entries --------------------------------- Once you have created a `~/diary' file, you can use the calendar to view it. You can also view today's events outside of Calendar mode. `d' Display all diary entries for the selected date (`view-diary-entries'). `Mouse-2 Diary' Display all diary entries for the date you click on. `s' Display the entire diary file (`show-all-diary-entries'). `m' Mark all visible dates that have diary entries (`mark-diary-entries'). `u' Unmark the calendar window (`calendar-unmark'). `M-x print-diary-entries' Print hard copy of the diary display as it appears. `M-x diary' Display all diary entries for today's date. `M-x diary-mail-entries' Mail yourself email reminders about upcoming diary entries. Displaying the diary entries with `d' shows in a separate window the diary entries for the selected date in the calendar. The mode line of the new window shows the date of the diary entries and any holidays that fall on that date. If you specify a numeric argument with `d', it shows all the diary entries for that many successive days. Thus, `2 d' displays all the entries for the selected date and for the following day. Another way to display the diary entries for a date is to click `Mouse-2' on the date, and then choose `Diary' from the menu that appears. To get a broader view of which days are mentioned in the diary, use the `m' command. This displays the dates that have diary entries in a different face (or places a `+' after these dates, if display with multiple faces is not available). The command applies both to the currently visible months and to other months that subsequently become visible by scrolling. To turn marking off and erase the current marks, type `u', which also turns off holiday marks (*note Holidays::.). To see the full diary file, rather than just some of the entries, use the `s' command. Display of selected diary entries uses the selective display feature to hide entries that don't apply. The diary buffer as you see it is an illusion, so simply printing the buffer does not print what you see on your screen. There is a special command to print hard copy of the diary buffer *as it appears*; this command is `M-x print-diary-entries'. It sends the data directly to the printer. You can customize it like `lpr-region' (*note Hardcopy::.). The command `M-x diary' displays the diary entries for the current date, independently of the calendar display, and optionally for the next few days as well; the variable `number-of-diary-entries' specifies how many days to include. *Note Customizing the Calendar and Diary: (elisp)Calendar. If you put `(diary)' in your `.emacs' file, this automatically displays a window with the day's diary entries, when you enter Emacs. The mode line of the displayed window shows the date and any holidays that fall on that date. Many users like to receive notice of events in their diary as email. To send such mail to yourself, use the command `M-x diary-mail-entries'. A prefix argument specifies how many days (starting with today) to check; otherwise, the variable `diary-mail-days' says how many days.  File: emacs, Node: Format of Diary File, Next: Date Formats, Prev: Diary Commands, Up: Diary The Diary File -------------- Your "diary file" is a file that records events associated with particular dates. The name of the diary file is specified by the variable `diary-file'; `~/diary' is the default. The `calendar' utility program supports a subset of the format allowed by the Emacs diary facilities, so you can use that utility to view the diary file, with reasonable results aside from the entries it cannot understand. Each entry in the diary file describes one event and consists of one or more lines. An entry always begins with a date specification at the left margin. The rest of the entry is simply text to describe the event. If the entry has more than one line, then the lines after the first must begin with whitespace to indicate they continue a previous entry. Lines that do not begin with valid dates and do not continue a preceding entry are ignored. You can inhibit the marking of certain diary entries in the calendar window; to do this, insert an ampersand (`&') at the beginning of the entry, before the date. This has no effect on display of the entry in the diary window; it affects only marks on dates in the calendar window. Nonmarking entries are especially useful for generic entries that would otherwise mark many different dates. If the first line of a diary entry consists only of the date or day name with no following blanks or punctuation, then the diary window display doesn't include that line; only the continuation lines appear. For example, this entry: 02/11/1989 Bill B. visits Princeton today 2pm Cognitive Studies Committee meeting 2:30-5:30 Liz at Lawrenceville 4:00pm Dentist appt 7:30pm Dinner at George's 8:00-10:00pm concert appears in the diary window without the date line at the beginning. This style of entry looks neater when you display just a single day's entries, but can cause confusion if you ask for more than one day's entries. You can edit the diary entries as they appear in the window, but it is important to remember that the buffer displayed contains the *entire* diary file, with portions of it concealed from view. This means, for instance, that the `C-f' (`forward-char') command can put point at what appears to be the end of the line, but what is in reality the middle of some concealed line. *Be careful when editing the diary entries!* Inserting additional lines or adding/deleting characters in the middle of a visible line cannot cause problems, but editing at the end of a line may not do what you expect. Deleting a line may delete other invisible entries that follow it. Before editing the diary, it is best to display the entire file with `s' (`show-all-diary-entries').  File: emacs, Node: Date Formats, Next: Adding to Diary, Prev: Format of Diary File, Up: Diary Date Formats ------------ Here are some sample diary entries, illustrating different ways of formatting a date. The examples all show dates in American order (month, day, year), but Calendar mode supports European order (day, month, year) as an option. 4/20/93 Switch-over to new tabulation system apr. 25 Start tabulating annual results 4/30 Results for April are due */25 Monthly cycle finishes Friday Don't leave without backing up files The first entry appears only once, on April 20, 1993. The second and third appear every year on the specified dates, and the fourth uses a wildcard (asterisk) for the month, so it appears on the 25th of every month. The final entry appears every week on Friday. You can use just numbers to express a date, as in `MONTH/DAY' or `MONTH/DAY/YEAR'. This must be followed by a nondigit. In the date itself, MONTH and DAY are numbers of one or two digits. The optional YEAR is also a number, and may be abbreviated to the last two digits; that is, you can use `11/12/1989' or `11/12/89'. Dates can also have the form `MONTHNAME DAY' or `MONTHNAME DAY, YEAR', where the month's name can be spelled in full or abbreviated to three characters (with or without a period). Case is not significant. A date may be "generic"; that is, partially unspecified. Then the entry applies to all dates that match the specification. If the date does not contain a year, it is generic and applies to any year. Alternatively, MONTH, DAY, or YEAR can be a `*'; this matches any month, day, or year, respectively. Thus, a diary entry `3/*/*' matches any day in March of any year; so does `march *'. If you prefer the European style of writing dates--in which the day comes before the month--type `M-x european-calendar' while in the calendar, or set the variable `european-calendar-style' to `t' *before* using any calendar or diary command. This mode interprets all dates in the diary in the European manner, and also uses European style for displaying diary dates. (Note that there is no comma after the MONTHNAME in the European style.) To go back to the (default) American style of writing dates, type `M-x american-calendar'. You can use the name of a day of the week as a generic date which applies to any date falling on that day of the week. You can abbreviate the day of the week to three letters (with or without a period) or spell it in full; case is not significant.  File: emacs, Node: Adding to Diary, Next: Special Diary Entries, Prev: Date Formats, Up: Diary Commands to Add to the Diary ---------------------------- While in the calendar, there are several commands to create diary entries: `i d' Add a diary entry for the selected date (`insert-diary-entry'). `i w' Add a diary entry for the selected day of the week (`insert-weekly-diary-entry'). `i m' Add a diary entry for the selected day of the month (`insert-monthly-diary-entry'). `i y' Add a diary entry for the selected day of the year (`insert-yearly-diary-entry'). You can make a diary entry for a specific date by selecting that date in the calendar window and typing the `i d' command. This command displays the end of your diary file in another window and inserts the date; you can then type the rest of the diary entry. If you want to make a diary entry that applies to a specific day of the week, select that day of the week (any occurrence will do) and type `i w'. This inserts the day-of-week as a generic date; you can then type the rest of the diary entry. You can make a monthly diary entry in the same fashion. Select the day of the month, use the `i m' command, and type rest of the entry. Similarly, you can insert a yearly diary entry with the `i y' command. All of the above commands make marking diary entries by default. To make a nonmarking diary entry, give a numeric argument to the command. For example, `C-u i w' makes a nonmarking weekly diary entry. When you modify the diary file, be sure to save the file before exiting Emacs.